After an accident, the auto body repairs you need are often due to trim and parts like bumper covers. If you had a small accident, the damage might seem minor until you lose the bumper cover. When this happens, it can also take wiring, lights, and other parts with it. The following auto collision repair information will help you repair this damage when you lose your bumper cover.

Document the Damage to Bumpers

The damage after the accident needs to be documented, so you know what repairs will be needed. If the bumper cover falls off, you will want to document these problems too. Look for the damage to wiring and other components. Try to take close up photos of this damage too. This will ensure that everything is well-documented when you have to make an insurance claim to fix the damage.

Secure and Seal Loose Electrical Wires

The interior of the bumper cover may have wiring for lights and modern technology. These wires can be damaged if they get wet while waiting for repairs. Therefore, you want to tape the wires that are loose to prevent this damage. At the end of broken wires, use electrical tape to seal them and prevent short circuits. There are also rubber wire splices that can be folded and melted together to seal the wires' frayed ends.

Remove Broken Fasteners and Rivets

When bumpers are damaged in accidents, rivets that hold the covers in place break. There may also be some remanence of these old fasteners on the metal frame behind the cover. To ensure you do not have problems after repairing the bumper, you want to make sure all the rivets are removed. Before you have the new bumper cover installed, you want to make sure that all the rivets and other fasteners are removed. You can use a screwdriver or cutting tools to snap all the rivets off. If you are going to be reusing any fasteners, try not to damage them as you remove them.

Check Metal Frames for Damage

The front end of your car is an area where there are different metal frames that are connected to the body. These make up the crumple-zone that keeps you safe in the case of an accident. Therefore, you want to have all the metalwork of the frame and body checked for movement. The frame may need adjustments and repairs before the bumper can be fixed.

The damage to the bumper cover can often be more severe than you may think. Therefore, you will want to contact an auto collision repair service to fix these problems when the bumper falls off.